Zavig F7115 Guía de instalación descargar pdf (Pagina 2)

WPS: Push WPS button to configure wireless connection automatically. This function is only available in F7115.

Reset: When the device is powered, press the Reset Button to reboot the device, or hold the Reset Button for 10

seconds to set the settings back to factory default.

I/O Terminal Block Pin Definition

PIN Definition Description Max. V/A

Ground

+ 12V DC

12V DC

1.2W

RS-485 -

RS-485 +

Digital Output 1

Uses an NPN transistor with the emitter connected to the GND

pin. If used with an external relay, a diode must be connected in

parallel with the load for protection against voltage transients.

100 mA

24V

Digital Output 2

Uses an NPN transistor with the emitter connected to the GND

pin. If used with an external relay, a diode must be connected in

parallel with the load for protection against voltage transients.

100mA

24V

Alarm Input 1

Connected to GND to activate, or leave floating (or unconnected)

to deactivate.

30V DC

Alarm Input 2

Connected to GND to activate, or

leave floating (or unconnected) to deactivate.

30V DC

SD Card LED Indicato

Power LED Indicato

WLAN LED Indicato

(F7115)

8 7 6 5 4 3 2 1

1 2 3 4 5 6 7 ... 13 14

Sin comentarios

Zavig F7115 Guía de instalación Pagina 2